Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

2.5L Manual






Starter

Special tools, testers and auxiliary items required

Torque Wrench (V.A.G 1331)

Torque Wrench (V.A.G 1332)

Spring-Type Clip Pliers (VAS 5024)

Removing

Always follow the instructions in the Repair Information exactly when disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

- Remove the engine cover together with the air filter and intake hoses.

- Slide the cap off the solenoid switch in - direction of arrow -.






- Remove the positive cable - 1 - and disconnect the connector from terminal 50 - 2 -.






- Remove the ground wire from the starter bolt - arrow -.






- Remove the starter bolt - arrow -.






- Remove the noise insulation.

- Remove the nut - 1 - from the bolt at the bottom of the starter.






- Remove the wire holder - 2 -.

- Remove the starter bolt - arrow -.






- Remove the starter.

Installing

Installation is performed in the reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification. Refer to => [ Starter Overview ] Service and Repair.