Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Washer Fluid Level Switch: Service and Repair






Windshield Washer Fluid Level Sensor (G33)

Turn off the ignition and all electrical consumers.

Remove the key.

Removing

- Remove the front bumper cover.

- Release and disconnect the windshield washer fluid level sensor connector - 2 -






- Pull the windshield washer fluid level sensor - 2 - out of the rubber seal on the container - 2 -.

- Catch any draining washer fluid in a suitable container.

Installing

Installation is performed in the reverse order of removal. Note the following:

- Bleed the headlamp washer system after finishing assembly, refer to => [ Headlamp Washer System, Bleeding ] Procedures.