Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heat and Fresh Air Controls






Heat and Fresh Air Controls

Removing

The controls consist of two separable housings. Before removing controls, bring rotary buttons into the following positions:

Heater control to "cold"

Blower to "0"

Air flow direction to "footwell"

- Remove the trim from the heater and A/C controls.






- Remove the bolts - 2 - (4.2 x 45) and - 3 - (4.2 x 16) and the controls - 1 - from the center console.

Tightening specification for the bolts - 2 - and - 3 -: 1.5 +/- 0.2 Nm.






- Release the connector - A - by pulling it in direction of arrow - 1 -.

- Press connector release - B - toward the connector - arrow 2 - and disconnect the connector - C -.

- Disconnect the connector - D -.

Illustration shows "Climatic" version. The procedure for releasing the "Climatronic" connector is the same.

Installing

Installation is performed in reverse order of removal, make sure when doing so that the rotary buttons have the same position as when removing.