Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Installation
1.
Position the overdrive on the transmission output shaft. Install the nuts. Torque to
7-11 Nm (5-8 ft lb).
2.
Raise the transmission and install the cross member.
3.
Reconnect the wires at the solenoid.
4.
Reconnect the drive shaft.
5.
Fill with oil to plug hole level. M46:
Automatic Transmission Fluid Type F or G.
6.
Recheck oil level after driving approx.
15 km (10 miles).
