Springs

Application Chart:

Valve Spring Specifications:

NOTE: The table may be used only for identifying the springs during assembly. A spring is not necessarily defective if a parameter, such as the spring length, does not agree exactly with the specified value. Special test equipment is required to determine whether or not the spring characteristics are acceptable.

1) A = Upper front valve body
B = Upper rear valve body
C = Lower valve body

2) Two springs in accumulator piston C2

Accumulator Pistons, Accumulator Springs:

1. Double springs in piston C2.
2. Double springs in B2.
3. From May 1985.
4. To April 195 inclusive.

Separator Plate, Cover Plate, Lower Valve Body: