Throttle Position Sensor: Adjustments

Fig. 358 CHECK TROTTLE SWITCH SETTING:

NOTE: Only the throttle position sensor on vehicles equipped with LH 2.4 jetronic can be adjusted. The sensor for LH 3.1 jetronic equipped vehicles is not adjustable.

1. Open the throttle valve slightly and listen for a "click".
2. Adjust the throttle switch by loosening the retaining screws (3 mm screw). With the throttle fully closed turn the switch slightly clockwise. Turn the switch back again until a "click" is heard. Tighten the retaining screws. Recheck the setting.