Antitheft Radio - Code Inhibit Period Incorrect
NUMBER929
GROUP
39
MODEL
900
TITLE
ANTI-THEFT CODED RADIO
940/960 1991 -->
MARKET
US and Canada
DATE
January 1993
REFERENCE:
NONE
ANTI-THEFT RADIO, CODE-INHIBIT PERIOD
Applicable to CR-814 Radio
The code-inhibit period specified in the radio instruction manual and other literature is incorrect. This may result in claims for radios which are actually fault-free.
Enter anti-theft code
If the radio has been disconnected from the supply, "cod" will be displayed in the window when it is again switched on and the "cd" indicating lamp will flash. Press the buttons to enter the six-digit anti-theft code (note that only three digits will be visible in the window) and press the "aut" button when you are absolutely sure that the code which has been entered is correct. If the code is correct, "on" will be displayed, indicating that the radio is ready for use. However, if in incorrect code his been entered, the complete, correct code must be re-entered from the beginning.
Incorrect code
If an incorrect code has been entered, "rPt" will be displayed in the window. Enter the correct code. If three attempts are made to enter an incorrect code, the radio will inhibit any further attempt for four hours and "OFF" will be displayed in the window. The radio must be connected to the supply and remain switched on during this period. The code entry procedure may be repeated when the four-hour period has elapsed and the code is displayed in the window.
After three unsuccessful attempts to enter an incorrect code, the radio will inhibit further attempt for a period of four hours.