Blower Motor Relay: Service and Repair

Blower Motor Relay

Removal:





- Ignition off.
- Remove stop from glove compartment cover by pushing in catches with a screwdriver and pulling the stop out at the same time.
- Remove glove compartment screws.
- Remove glove compartment carefully from instrument panel.

Installation:
- Replace relay, position as per Image. Test relay.
- Install glove compartment, screws and glove compartment cover stop. Push stop into cover, making sure catches lock home.

Relay location, AC relays:





1) Fan max relay (5 terminals)
2) AC (4 terminals).