Passenger Compartment Sensor

(ECC Only)





1. Ignition off
The passenger compartment temperature sensor is located behind the driver or passenger grab handle, where there is an inlet hole in the inside cover.
2. Expose passenger compartment temperature sensor:
- Remove grab handle (2 screws).
- Bend back panel B-post.
- Undo cover.
- Bend out corner of inside cover.
3. Remove connection:
Undo connection from passenger compartment temperature sensor
4. Undo passenger compartment temperature sensor:
Undo the screws (2) holding the passenger compartment temperature sensor.
5. Install:
- Passenger compartment temperature sensor (2 screws).
- Connector.
- Cover panel.
- Panel B-post.
- Grab handle (2 screws).