Passenger Compartment Sensor

Check Passenger Compartment Temperature Sensor:








- Ignition off.
- Disconnect connector from passenger compartment temperature sensor. Service and Repair
- Connect an ohmmeter across pins 3 and 5 of the passenger compartment temperature sensor.
- If value is OK, ohmmeter should read approx. 8 - 12 K ohms.
- If not, ohmmeter reads 0 ohm, there is a short in the passenger compartment temperature sensor. Replace passenger compartment temperature sensor and refit in reverse order.
- Check DTC. [1][2]Initial Inspection and Diagnostic Overview