Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 1996 >> 960 L6-3.0L VIN 96 B6304F2 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Service and Repair



Fluid Temperature Sensor, Replacement
- Disconnect battery ground lead





- Unclip HO2S lead from transmission member and oil pan and open HO2S connectors.
- Remove front exhaust pipe.
- Disconnect sensor connector and wiring Move sensor wiring to right-hand side.





- Unscrew sensor from front oil pipe.

Installation
- Sensor is replaced complete with wiring and connector.
- Lubricate sensor 0-ring with ATF fluid.
- Install sensor and tighten to 10 Nm (7.5 ft lb).
- Install connector.
- Move wiring to left-hand side of transmission. Connect sensor connector and clip wiring in position.
- Install exhaust gas pipe and HO2S lead and connect HO2S connectors
- Reconnect battery ground leads and erase DTCs (if any).

pro multis · About Operation CHARM