Initiate the Immobilizer Control Module.
Initiate the immobilizer control module.
Information
This function is used when a defective control module has been replaced by a new one. During initiation, the software is first loaded into the control module. Key codes for all keys are then programmed.
Ordering software/key
Note! To initiate the immobilizer control module, software and keys must be ordered.
Order program and keys for S/V 70 as described in 9438440.
Order software and keys for C 70 as described in 9438435.
Initiate the control module
Note! Keys can only be programmed or deleted once the keys and/or software are accessible.
Use VIDA vehicle communication to check that no diagnostic trouble codes have been stored during the work.