Sealed Connector Type 2

Connector sealed, repair

Special tools: 951 2632 Terminal removal tool 951 2632 Terminal Removal Tool , 951 2639 Terminal removal tool 951 2639 Terminal Removal Tool , 951 2852 Terminal removal tool 951 2852 Terminal Removal Tool , 951 2853 Terminal removal tool 951 2853 Terminal Removal Tool.

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Connector, dismantling

Secondary lock




Open the catches and pull out the secondary lock, use tool 951 2853 Terminal removal tool 951 2853 Terminal Removal Tool or an electrician's screwdriver, as illustrated.

Primary lock




Use tools 951 2632 Terminal removal tool 951 2632 Terminal Removal Tool , 951 2639 Terminal removal tool 951 2639 Terminal Removal Tool to remove the primary lock, as illustrated.
At the same time pull the cable carefully backwards.

Alternatively use tool 951 2852 Terminal removal tool 951 2852 Terminal Removal Tool as illustrated.

Note! Tool 951 2852 Terminal removal tool 951 2852 Terminal Removal Tool can only be used for socket housings.

Connector, assembling

Primary locking




Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the seal is correctly positioned and that the cable terminal is properly locked by pulling carefully on the cable.