Rear Bumper: Service and Repair

Rear bumper

Removal





Remove:
- 3 screws on each side.
- 4 nuts behind the panels in the cargo compartment which secure the panels under the tail lamps.
- the connector for the radio antenna.
- 2 bolts.
Installation
When installing the bumper, check that it is secure in its side mountings.

Disassembly





Remove:
- 2 clips for the panels under the tail lamps.
- 5 clips at the bottom.
- 9 quick-release mountings on top.
Twist the contents out of the bumper wraparound.

Disassembling (continued)





Remove:
- 11 quick-release mountings on top.
- 5 quick-release mountings at the bottom.

Disassembling (continued)




Remove 4 clips for the antenna panel.