Wiring Up For Voltage Measurement

Wiring up for voltage measurement





Wiring up
- Take 2 connectors Part No. 968515-7 and 968516-5.
- Clamp to 4 lengths of cable, at least 1.5 mm. sq.(in2). Length must not exceed 3 meters, since voltage drop in cable increases with length which could supply too low a voltage to seat.
- Attach terminal pins, Part No. 979002-3 and 973117-5, to cables and press into connectors as per figure.

Connecting wiring
- Connect wiring between 4-pin connector to seat outer front fixings in vehicle and to 4-pin connector at front edge of seat outer guide rail.