Sealed Connector Type 3

Connectors, repair

Special tools: 951 2637 Terminal removal tool 951 2637 Terminal Removal Tool.

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Connector, dismantling

Secondary lock




Adjust the lock pins using an electrician's screwdriver and press up the secondary lock, as illustrated.

The primary lock




Use tool 951 2637 Terminal removal tool 951 2637 Terminal Removal Tool to press down the cable terminal locking tab, as illustrated.
At the same time pull the cable carefully backwards.

Connector, assembling

Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the seal is correctly positioned and that the cable terminal is properly locked by pulling carefully on the cable.

Secondary lock
Press the secondary lock into place.