Connector Fuse Holder, Repair

Connector fuse holder, repair

Special tools: 951 2633 Terminal removal tool 951 2633 Terminal Removal Tool , 951 2639 Terminal removal tool 951 2639 Terminal Removal Tool , 951 2852 Terminal removal tool 951 2852 Terminal Removal Tool.

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Expose the relevant fusebox.
Remove the fuses. Note the positions of the fuses.

Dismantling

Secondary lock
Releases the catches for the secondary lock.
Slide the secondary lock to one side to access the primary lock, as illustrated.




Fuse holder cargo compartment.




Fuse holder passenger compartment.

Primary lock








Use tools 951 2633 Terminal removal tool 951 2633 Terminal Removal Tool , 951 2639 Terminal removal tool 951 2639 Terminal Removal Tool to remove the primary lock, as illustrated.

Note! The relay holders can be connected and several locks may need to be adjusted at the same time.

At the same time pull the cable carefully backwards.




Alternatively use tool 951 2852 Terminal removal tool 951 2852 Terminal Removal Tool as illustrated.

Installation

Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Secondary lock
Slide back the secondary lock.

Finishing work

Install the relays.

Note! Take care with the positioning.

Reinstall the central relay box.