Connector Relay Box, Repair

Connector relay box, repair

Special tools: 951 2633 Terminal removal tool 951 2633 Terminal Removal Tool , 951 2639 Terminal removal tool 951 2639 Terminal Removal Tool , 951 2852 Terminal removal tool 951 2852 Terminal Removal Tool.

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work





Expose the relevant relay box.
Remove the relevant relays, noting their position.

Dismantling

Secondary lock




Release the relevant secondary lock by adjusting the locks with an electrician's screwdriver, as illustrated.

Primary lock




Use tools 951 2633 Terminal removal tool 951 2633 Terminal Removal Tool , 951 2639 Terminal removal tool 951 2639 Terminal Removal Tool to remove the primary lock, as illustrated.
At the same time pull the cable carefully backwards.




Alternatively use tool 951 2852 Terminal removal tool 951 2852 Terminal Removal Tool as illustrated.

Installation

Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable,

The secondary lock
Press the secondary lock into place.

Finishing work

Install the relays.

Note! Take care with the positioning.

Install the relevant relay box.