Example 4
Example 4
Socket type housings p/n 1362989-4, and corresponding pin housings
Replacement of cable terminals
Open the housing
Hold the housing as shown and open the secondary locking as follows:
- Using a small screwdriver press the catches on the secondary locking in from the side shown in the illustration. A "click" will be heard.
When the secondary locking is pressed in the locking cover slides open and the cavities open.
Extract the cable terminal
Follow instructions in Cavity opening with one extraction groove Cavity Opening With One Extraction Groove.
Crimp new cable terminal
Crimp new cable terminal as in Crimping a cable terminal Crimping a Cable Terminal.
Insert the new cable terminal in the housing
Note! Note! The housing secondary locking must be in the open position as in Open the housing.
- Insert the new cable terminal in the housing from the cable side checking that it is in the correct cavity. A "click" indicates that the locking tab has engaged.
Close the housing
Hold the housing as shown and close it by activating the secondary locking as follows:
- Using a small screwdriver press in the catches on the secondary locking from the opposite side. A "click" indicates that the secondary locking has engaged.