Reading Off Parameters, Graphical Display

Parameter read-out - graphical presentation, Motronic 4.4





Connecting

Connecting the Volvo Scan Tool (ST)
The Volvo Scan Tool (ST) must be connected to the VIDA PC and data link connector (DLC) in the passenger compartment.





Is the Volvo Scan Tool (ST) connected and switched on?

Yes - FAULT FOUND

No - No Fault Found

------------------------

FAULT FOUND - Parameter read-out - graphical presentation

No Fault Found - Connecting Scan Tool (ST)

-------------------------------------------------

Connecting Scan Tool (ST)




Connecting the Volvo Scan Tool (ST)

Connecting the Volvo Scan Tool (ST)




- Ignition off.
Install the blue memory cassette in the Volvo Scan Tool (ST).
Connect adapter 951 1457 Adaptor 951 1457 Adaptor to cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters.
Connect the VIDA communication cable between the adapter and the VIDA PC.
Connect the cable from the Volvo Scan Tool (ST) (P/N 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters ) to the data link connector (DLC) in the passenger compartment.
Power up the Volvo Scan Tool (ST).





Continue - DONE

------------------------

DONE - Parameter read-out - graphical presentation

-------------------------------------------------

Parameter read-out - graphical presentation




- Start engine.

Select "Continue" when the engine is running.

Continue - DONE

-------------------------------------------------

0 - DONE

-------------------------------------------------