Connector Type 1
Connectors, repair
Special tool 951 2637 Terminal removal tool 951 2637 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.
Connector, dismantling
Secondary lock
Fold up the secondary lock (1), as illustrated. Use an electrician's screwdriver.
Primary lock
Use tool 951 2637 Terminal removal tool 951 2637 Terminal Removal Tool to remove the primary lock, as illustrated.
At the same time pull the cable carefully backwards.
Connector, assembling
Primary locking
Check that the catches for the cable terminal are undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Secondary locking
Press the secondary lock into place.