Cavity Opening With One Extraction Groove

Cavity opening with one extraction groove

Terminal removal tool, p/n 9814229




A terminal removal tool p/n 9814229 with a single blade type tip must be used.
This terminal removal tool is used for cable terminals with one locking tab:




A 2.8 Timer




B 6.3 Receptacle terminal

Choose the terminal removal tool with the correct width




There are two sizes of the cavity opening.
See illustration.
Choose a terminal removal tool with ends which match the cavity opening extraction groove.
- The narrow ends are 1.5 mm wide.
- The wider ends are 2.7 mm wide.
Press the cable terminal in the cavity forwards as far as it will go to free the locking tab from the cavity catch.
Insert the terminal removal tool in the groove as illustrated.
Always follow the instructions in When secondary locking is of the lid type When Secondary Locking Is of the Lid Type which give the correct working procedure.
- Proceed to chapter New cable terminal New Cable Terminal Seal sws and plug Seal SWS and Plug. Replacing a cable terminal in order to crimp a new cable terminal.