Lifting Beam Measurement - 320 mm (12.6 in)
SECTION4
GROUP
43
NO
0002
YEAR
1997
MONTH
11
This Service Bulletin contains adhesive labels which should be stuck into the Service Manual indicated on each label. When the labels have been stuck into the relevant manuals this Service Bulletin should be discarded.
Lifting beam measurement 320 mm (12.6 in)
Background:
When removing transmission, the engine and transmission must be lowered so that the distance between the upper edge of the lifting beam (not lower edge as previously stated) and the spark plug cover is approximately 320 mm.
Corrective action:
See below.
Stick this label in Service Manual TP 4101201, Section 4(41,43,46), M56 Manual transmission, incl. clutch and driveshafts, 850 1992-, 50 that section D23 is covered:
Stick this label in Service Manual TP 4305201, Section 4(43), AW 50-42, 850 Automatic transmission 1992-, 50 that section U26 is covered:
Stick this label in Service Manual TP 4312201 Section 4(43), AW 50-42 transmission control module (TCM), 850 1996-, 50 that section HHA27 is covered:
Stick this label in Service Manual TP 4314201 Section 4(43, 46), AWD (All Wheel Drive), 850 1997-, so that section DA24 is covered:
Stick this label in Service Manual TP 4322201 Section 4(43), Automatic transmission AW50-42 (AWD), S70/V70 1997- so that section AA A24 is covered: