Initiate Immobilizer Control Module

Initiate immobilizer control module

Information
This function is used when a defective control module has been replaced. During initialization, software is downloaded into the control module first. The key codes for all keys are then programmed in.

Do wish to continue initializing the immobilizer control module?

Yes - Ordering software/key

No - DONE

-------------------------------------------------

Ordering software/key

Note! Software and keys must be ordered before the immobilizer control module can be initialized.

Order software and keys for S/V 70 according to 9438440.
Order software and keys for C 70 according to 9438435.


Continue - Initialize the control module

-------------------------------------------------

Initialize the control module

Note! Programming/initialization can be carried out when the keys and/or software have been delivered.

Program/initialize the control module for S/V 70 according to 9438440.
Program/initialize the control module for C 70 according to 9438435.
Check, in VIDA, that no diagnostic trouble codes have been stored during the process.


Continue - DONE

-------------------------------------------------