Programming Driver's Position (Left or Right Hand Drive) (ECC)

Programming Driver's Position (Left or Right Hand Drive) (ECC)







NOTE: In order for a new ECC control module to operate the control module must be programmed for driver position (LHD or RHD). A control module that has not been programmed will not operate at all and the green indicator LEDs in the REC and AC buttons will flash.


- Ignition on.
- Use Programming function to program the ECC control module.
- After programming the driver's position the AC button green indicator LED will flash until the throttle motor self adjustment is completed.

After performing this procedure, Self-Adjustment of the Damper Motor Limit Positions, ECC