Checking Cable, Continued

Checking Cable, Continued







- Ignition off.

Check connector #2 and #1 for a short-circuit to ground according to Checking wiring and terminals - Permanent faults, short-circuit to supply voltage according to Checking wiring and terminals - Permanent faults and for an open-circuit according to Checking wiring and terminals - Permanent faults.

Connect an ohmmeter between connector #5 and ground. Measure for an open-circuit according to Checking wiring and terminals - Permanent faults.

Checking Wiring and Terminals - Permanent Faults

Remedy as necessary.

Was a fault found?

Yes - Verification

No - Replacing Component