5. Verification

Verification







HINT: After the repair it is necessary to check that the fault has been rectified.

- Ignition off.
- Wait for at least 90 seconds.
- Connect the connectors, install the components etc.
- Ignition on.
- Gear selector in position P.
- Activate solenoid S2.

The value should change between OFF and ON.

Does the value change?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Fault-Tracing Information - Permanent Fault. Fault-Tracing Information - Permanent Fault