Operation CHARM: Car repair manuals for everyone.

Without Heated Seat


Control module, replace

Preparations

CAUTION: Install the transport safety device for the SIPS Airbag.

Removing

Make a note of radio code if anti-theft coded radio is installed.

Remove:






- Battery negative lead.
- Seat from car.
- The two screws from the bracket.
- Connector from the control module.

Reinstalling

Check that the new control module has P/N 9174904 (for the left seat) or 9174905 (for the right seat).
Reinstall in reverse order.

SIPS airbag, removing the safety device

Remove the transport safety device from the sensor module and return it to its storage place on the inside of the control panel.

Programming the memory functions

The new control module must be programmed with the positions for memory functions 1, 2 and 3. Otherwise diagnostic trouble codes (DTCs) PSL/PSR-323, PSL/PSR-322 or PSL/PSR-321 may be posted.