Clockspring Assembly / Spiral Cable
Adjustments
Service and Repair
Diagrams- Diagram Information and Instructions
- Diagnostic Aids
- VIDA (Vehicle Information & Diagnostics For Aftersales)
- Checking Wiring and Terminals
- Cable Terminals, Different Types
- Cables
- Cavity Opening Has Two Extraction Grooves
- Cavity Opening With One Extraction Groove
- Checking the Result of the Crimping Operation
- Connector
- Central Electrical Unit 1
- Connector Brake Control Module (BCM), Repair
- Connector Central Electrical Unit Engine/Transmission Control Module (ECM/TCM), Repair
- Connector Control Module for Anti-lock Brake System Module (ABS), Repair
- Connector Data Link Connector (DLC), Repair
- Connector Door, Repair
- Connector Fuse Holder, Repair
- Connector Relay Box, Repair
- Connector Supplemental Restraint System Module (SRS), Repair
- 12-Pin Connector
- 14-Pin Connector
- 22-Pin Connector
- 28-Pin Connector
- 47-Pin Connector
- 68-Pin Connector
- 88-Pin Connector
- Example 1
- Example 2A
- Example 2B
- Example 3
- Example 4
- Glossary
- Ground Points and Oxidation
- Housing With Half-Open Contact Side
- Housings With Round Cavity Opening
- Housings With Square Cavity Openings
- Inserting A Cable Terminal In A Housing
- New Cable Terminal
- Open the Connector
- Primary Locking in General
- Replacing Cable Terminals
- Single Terminal Housings
- Soldering, General
- Stripping a Cable
- Terminal Crimping
- Operating Procedures For Repairs
- Connectors, Repair
- Splicing the Cables
- Using Terminal Removal Tools
- Wiring
- Electrical Diagrams