DDM/PDM-0010

Condition
If control unit registers that DDM_9/PDM_10 and RD2 are low when central locking locks to normal lock position or unlocks from BLL, diagnostic trouble code DDM/PDM-0010 is displayed.

OR

Diagnostic trouble code (DTC) DDM/PDM-0010 is stored if the control module registers a short-circuit to ground or an open-circuit in signal cable M1. Diagnostic trouble code (DTC) DDM/PDM-0010 can be diagnosed when the central locking locks or unlocks.

Condition
- Nothing.

Possible source
- Signal wire M1 short circuited to ground.
- Open-circuit in signal cable M1.

Condition
- Will not lock from normal locked position
- Does not open from the deadlock position BLL.