DTC ECM-9300

Condition







Diagnostic trouble code (DTC) ECM-9300 is stored if the engine control module (ECM) registers a fault in the signal from the clutch pedal position sensor.

Substitute value
- Cruise control switched off.

Possible source

Signal too high:
- short-circuit to ground in the signal cable
- Defective clutch pedal sensor.

Signal too low:
- Short-circuit to ground in the signal cable
- Defective clutch pedal sensor.

Faulty signal:
- Incorrectly installed clutch pedal sensor
- Defective clutch pedal sensor.

Fault symptom[s]
- Electronic throttle system warning lamp lights
- Cruise control does not function at all.