DTC ECM-930A

Condition







Diagnostic trouble code (DTC) ECM-9300 is stored if the engine control module (ECM) registers a fault in the signal from clutch pedal position sensor.

Substitute value
Cruise control shut off.

Possible source

Signal too high:
- short-circuit to ground in the signal cable
- defective clutch pedal sensor.

Signal too low:
- short-circuit to ground in the signal cable
- defective clutch pedal sensor.

Faulty signal:
- incorrectly installed clutch pedal sensor
- defective clutch pedal sensor.

Fault symptom[s]
- Electronic throttle system warning lamp light
- cruise control does not function at all.