Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Cylinder Head Components
Cylinder Head Tighten the screws alternately from the center and outwards.
Stage 1
20 Nm
Stage 2
60 Nm
Stage 3
angle-tighten 130 degrees
Maximum Out-of-true Front-rear
0.50 mm
Lateral
0.20 mm
Cylinder head height
129.00 ± 0.05 mm
Maximum machining
0.30 mm
CAUTION: Scratches and corrosion to the
cylinder head gasket face should only be machined on a flat cylinder head.
