Intake Manifold Torque

Remove the intake manifold by lifting it approximately 20 mm

The Intake Manifold And Gasket
- Install a new gasket held in position by the lower screws for the intake manifold
- Install the intake manifold
- Install the crankcase ventilation. The crankcase ventilation must be installed through the gap between the second and third channels
- Install the three upper screws.
Tighten all screws (starting from the center) 20 Nm

Install the Fuel Rail And The Injector Nozzles.
Use new screws. Tighten 10 Nm
Press the quick-release connector together until a clicking sound is heard.

Intake manifold 19 Nm