Checking the Steering Wheel Module (SWM)

Checking the steering wheel module (SWM)

Fault-tracing information
Before continuing with fault-tracing, the following must be checked:
- All tests for the relevant symptom must have been carried out
- No component, connector or wiring faults etc. should have been detected.

Have all tests been carried out and no faults detected?

Yes - Replacing the component

No - No Fault Found

-------------------------------------------------

Replacing the component
Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information:
- To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing Service and Repair.





Was a fault detected?

Yes - Fault Found

No - No Fault Found

-------------------------------------------------