Checking For Open-Circuits, Contact Resistance and Oxidation

Checking For Open-Circuits, Contact Resistance And Oxidation







Check ground terminal 31/96 and the cable between the ground terminal and transmission control module (TCM) terminal #A53 (#A53).

Check for an open-circuit according to Checking wiring and terminals. Permanent faults. Check for contact resistance and oxidation according to Checking wiring and terminals. Permanent faults.

Check the ground lead between the battery and the body. Check for an open-circuit according to Checking wiring and terminals. Permanent faults. Check for contact resistance and oxidation according to Checking wiring and terminals. Permanent faults.

Select Continue when the fault has been remedied.

Continue with Next Procedure. Verification