Immobilizer Control Module, Initiating.

Immobilizer control module, initiating

Information
This function is used when a defective control module has been replaced by a new one. During initiation, the software is first loaded into the control module. Key codes for all keys are then programmed.

Ordering software/key

Note! To initiate the immobilizer control module, software and keys must be ordered.

Order keys and download appropriate software.

For engine B4184SJ with engine management system Melco 2
Order keys and download appropriate software.

Control module, initiating

Note! Keys can only be programmed or deleted once the keys and/or software are accessible.

For engine B4184SJ with engine management system Melco 2
Program/initiate the control module.
Check in VIDA that no diagnostic trouble codes have been stored during the work.