Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Service and Repair



Temperature Sensor Evaporator

NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off
Ignition off.





Removal

Removing the temperature sensor for the evaporator





Fold down the carpet in the driver's side footwell towards the heater unit.

Turn the temperature sensor together with the cable harness a � turn clockwise.
Pull the temperature sensor straight out. Remove the temperature sensor.
Remove the connector.

Installation

Installing the temperature sensor for the evaporator
Connect the connector.

Align the hooks for the temperature sensor in the opening so that the connector is turned down.
Place the temperature sensor down against the surface of the heater unit. Turn the temperature sensor a � turn counter-clockwise.

Finishing

Testing the climate control system
Carry out a performance test on the climate control unit.