Initializing the Window Position

Initializing the window position

Initialization of window
The diagnostic trouble code (DTC) is stored and the automatic power window control stops working for the relevant window if the power window mechanism loses information about the position of the window.
The window position must be reinitialized to erase the diagnostic trouble code (DTC).
Select the desired alternative.
1. Initializing the window in the front door
2. Initializing the window in the rear door
3. Exit.





-------------------------------------------------

Initializing the window in the front door




- Ignition on.
Move the window to its upper limit position using manual control.
Initialize the window by clicking on the VCT2000 symbol.
Verify the initialization by raising and lowering the window a few times.





-------------------------------------------------

Initializing the window in the rear door




- Ignition on.
Move the window to its upper limit position using manual control.
Initialize the window by clicking on the VCT2000 symbol.

Alternatives
1. Initializing the window in the rear door on the driver's side
2. Initializing the window in the rear door on the passenger side.
Verify the initialization by raising and lowering the window a few times.





-------------------------------------------------