Programming and Relearning

Programming soft stop

Programming soft stop




Problems with the windows in the front doors can occur when they are in the lower limit position, for example, problem with the windows positioned vertically in relation to each other, or problems with the windows height in relation to the window trim. The distance for soft stop, the windows lower limit position, can then be programmed.
Two distance settings can be selected:
- 6 mm
- 15 mm.




- Ignition on
- Press the VCT2000 symbol and read off the setting. Change the setting by marking the desired alternative and programming. Check that the read off value is changed to the desired alternative

Continue - DONE

-------------------------------------------------