Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 2004 >> S80 L6-2.9L VIN 92 B6294S2 >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Sensor, Front, Replacing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Sensor, Front, Replacing






Wheel sensor, front, replacing

Removal

Switch off the ignition. Remove the wheel and wheel sensor





Note! Blow clean around the sensor using compressed air before removing.

Remove the sensor mounting screw. Pull out the sensor.
Remove the electrical cables from the brackets.
Remove the clips from the electrical cables.
Separate the connector. Remove the sensor.

Installation

Install the wheel sensor




Clean around the sensor seat so that when installed the sensor will be in the correct position against the pulse wheel. Use a soft brush.

Install:
- the sensor. Tighten the screw. Tighten to 10 Nm
- the wiring in its brackets
- the clips
- the connector.
Check that the wiring is installed in the brackets and clips.

Install the wheel
See Installing wheels Service and Repair

Function test
Read off any diagnostic trouble codes (DTCs) stored in the control module. Erase.
Interrupt the diagnostic function by turning off the ignition.

Test drive the car
See Test Drive Form (ABS), description Test Drive Form (ABS), Description
Check that no diagnostic trouble codes (DTCs) are stored.
Interrupt the diagnostic function by turning off the ignition.

pro multis · About Operation CHARM