Fuel Level Sensor: Service and Repair

Fuel Pump And Level Sensor Unit

NOTE: Some variation may occur. However, the essential information in the illustrations is always correct.

Removing
Remove the fuel tank.

NOTE: Ensure that the lever on the level sensor is not damaged when removing the pump.

Remove:





- the large plastic nut, 1 pc. Use: 999 7111
- the pump.

Transfer of suction line (for vehicles equipped with auxiliary heater)





Remove the plug for the suction line from the underside of the level sensor, use a 9 mm socket.
Transfer the suction line to the new fuel pump.

Installing

NOTE: Ensure that the lever on the level sensor is not damaged when installing the pump.

Install:





- new O-ring
- the level sensor

NOTE: The marking on the level sensor must be aligned with the marking on the fuel tank.

- the 1 large plastic nut. Use: 999 7111.

Install the fuel tank.