Initializing the Window Position

Initializing the window position

Initialization of window
The diagnostic trouble code (DTC) is stored and the automatic power window control stops working for the relevant window if the power window mechanism loses information about the position of the window.
The window position must be reinitialized to erase the diagnostic trouble code (DTC).
Select the desired alternative.
1. Initializing windows in doors.
2. Initializing rear windows.
3. Exit.





Select the desired alternative.

1 - Initializing windows in doors

2 - Initializing the rear window

3 - Exit Fault-tracing

-------------------------------------------------

Initializing windows in doors




- Ignition on.
Move the window to its upper limit position using manual control.
Initialize the window by clicking on the VCT2000 symbol.
Verify the initialization by raising and lowering the window a few times.





Do you wish to continue initializing the rear windows?

Yes - Initializing the rear window

No - Exit Fault-tracing

-------------------------------------------------

Initializing the rear window




- Ignition on.
Move the window to its upper limit position using manual control.
Initialize the window by clicking on the VCT2000 symbol.
Verify the initialization by raising and lowering the window a few times.





Do you wish to continue initializing the door windows?

Yes - Initializing windows in doors

No - Exit Fault-tracing

-------------------------------------------------