Signal Specification, Steering Wheel Angle Sensor Module

SIGNAL SPECIFICATION, STEERING WHEEL ANGLE SENSOR MODULE (SAS)

Signal specification

Connector A





All the values given below are between the relevant terminal stated in column and terminal #A2 (ground). This applies. unless otherwise indicated in brackets.

Note! It is important to connect the breakout box and check ground terminals before reading off.

U = DC voltage in volts (V)
U-bat = battery voltage
U-low = voltage approximately 0 V
t = time in milliseconds (ms)
U-AC = AC voltage in volts (V)
F = frequency in Hertz (Hz)
% duty = duty cycle (pulse ratio) as a percentage (%)

Terminal 1 - 7:

Terminal 7 (continued) - 10: