System Specifications

Cylinder Head





Stage 1 45 Nm
Stage 2 45 Nm
Stage 3 90 degree
Stage 4 180 degree

Warpage





Camshaft Cover





Use sequence 1-9 and tighten the camshaft cover crosswise, a few turns at a time, towards the cylinder head until full contact is reached. Hand tighten the other screws.





Tighten the screws in the sequence 1-27.
Torque M7 17 Nm





Tighten the screws in the sequence 28-60.
Torque M7 17 Nm

Centre bolt, exhaust camshaft
Stage 1 75 Nm
Stage 2 90 degree

Centre bolt, intake camshaft 110 Nm

Induction pipe M7 17 Nm

Exhaust manifold M8 24 Nm