Transmission Control Systems: Specifications

Component resistance values

Gear shift solenoids









For other values, see diagram. When taking readings at temperatures other than +20 °C, a control reading must be taken at +20 °C.
This is done to check whether the resistance is correct or not.

Linear pressure solenoid SLT, SLS/Lock-up solenoid SLU









For other values, see diagram. When taking readings at temperatures other than +20 °C, a control reading must be taken at +20 °C.
This is done to check whether the resistance is correct or not.

Oil temperature sensor

Oil Temperature Sensor:

The resistance decreases with increasing temperature.
The control reading should be taken at both temperatures to check whether the resistance is correct or not.

Solenoid Park / neutral position (PNP) switch