Mirrors, Auto Dim

Mirrors, auto dim























INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.






Mirrors, auto dim






Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.














Applies to mirrors with auto dim





Applies to all models
- Turn the mirror base 45 degrees clockwise.





Applies to mirrors without auto dim
- Carry out on both sides.





Applies to mirrors without auto dim
- Carry out on both sides.





Applies to mirrors without auto dim





Applies to mirrors without auto dim





Applies to mirrors without auto dim





Applies to mirrors without auto dim
- Locate and take the routed green 3-pin connector.





Applies to all models





- Reinstall the removed components in reverse order.





- Download the software for the accessory's function.
- Calibrate the compass. Information can be found in VIDA under:
- Repair
- Clean, check and adjust
- 8 Body and interior
- 88 Interior equipment
- 882 Interior equipment
- Interior equipment
- Compass calibration