Connecting The Breakout Box, Infotainment Control Module (ICM)

Connecting the breakout box

Connecting the breakout box




- Ignition off
- Remove the fuse for the infotainment control module (ICM) from the fusebox in the passenger compartment
- Expose the infotainment control module (ICM).
Connect adapter 951 1508 Adapter 10-7-5 pin 951 1508 Adapter 10-7-5 pin to the control module connector. Connect breakout box 951 1428 Breakout box 951 1428 Breakout box to the adapter.
Disconnect the breakout box in reverse order.

Note! Before the control module can be checked and readings taken, the removed fuses must first be re-installed.

Other information
- To access and remove the infotainment control module (ICM), see Infotainment control module (ICM), replacing Infotainment Control Module (ICM), Replacing
- For further information about signals and other values, see Signal specification Signal Specification, Infotainment Control Module (ICM)
- For information about fuses, see the relevant wiring diagram.