Passengers Under-Dash Fuse/Relay Box (Passengers MICU) Removal and Installation

Passenger's Under-Dash Fuse/Relay Box (Passenger's MICU) Removal and Installation

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

Removal

1. Do the battery terminal disconnection procedure.

2. Remove the passenger's kick panel Service and Repair.

3. Disconnect the connectors from the passenger's under-dash fuse/relay box (A).





4. Loosen the mounting bolt from the lower side of passenger's under-dash fuse/relay box.

5. Remove the mounting bolt from the upper side of passenger's under-dash fuse/relay box, and remove the passenger's under-dash fuse/relay box.

Installation

1. Install the relays and connect the connectors to the passenger's under-dash fuse/relay box, then install the passenger's under-dash fuse/relay box in the reverse order of removal.

2. Install the removed parts in the reverse order of removal.

3. Do the battery terminal reconnection procedure.

4. Confirm that all systems work properly.