Voltage Regulator, Bosch Generator From 2007
Voltage Regulator, Bosch Generator from 2007
Removing
- Remove the generator.
- Remove the screws - arrows -.
- Remove the cover - 1 - from the rear of the generator.
- Remove the screws - arrows -.
- Remove the voltage regulator - 1 -.
Installing
- When installing the voltage regulator, make sure the carbon brushes rest properly on the slip rings.
Install in reverse order of removal, observing the following:
- Install the generator.
• Tightening specifications, refer to => [ Bosch Generator Overview, from 2001 ] Bosch Generator Overview, From 2001.